Skip to content
English - United States
Contact us
  • There are no suggestions because the search field is empty.

How do I plan a Hunter irrigation system with the DVS Irrigation Planner?

First select “MP Rotator”, then the planner will plan with Hunter.

If you want to plan with Hunter MP Rotators, you must specify this at the very beginning of the DVS Irrigation Planner. Before drawing areas or uploading a plan, select the sprinkler type “MP Rotator”. The planner will then use suitable Hunter MP Rotators in the next steps.

Then follow these 5 steps: 
  1. Draw in the areas. 
  2. Place the system elements. 
  3. Calculate sprinklers automatically or set them yourself.
  4. Calculate pipes automatically or lay them yourself. 
  5. Check the material list and adjust it yourself if necessary.
If you wish, you can send us your plan afterwards—in our professional check, we will primarily look at sprinkler coverage (no gaps, no overlaps) and pipe routing and let you know if anything needs to be optimized. You can adjust the material list yourself.

In short: At the very beginning, select “MP Rotator” → Planner uses Hunter → we can check the placement.